3" Energy Saver
Midland's best quality constructed 3" Energy Saver commercial overhead door is the industry leader for strength and energy efficiency. Our 3" Energy Saver overhead door has an R-Value of 17.05 and is by far, the strongest commercial overhead door in the industry. Our 3" Energy Saver combines the good looks, outstanding durability, and exceptional heavy-duty strength, that will last for years to come. Midland's 3" Energy Saver overhead door is the longest lasting commercial overhead door in the industry.
When you choose a Midland commercial overhead door you can be confident that you have chosen the best overhead door that money can buy!
- 25 gauge rugged exterior and interior steel (optional 20 gauge exterior steel available).
- High density closed cell polystyrene core resulting in an exceptional R-Value of 17.05 and is moisture resistant.
- Embossed pebble-grained texture.
- Heavy duty galvanized steel track and hardware.
- Available with many window size options.
- Available in White, Almond, Sandtone, Tera-Bronze.
- Available in F/CR Brown, F/CR Hunter Green, and our new F/CR Beige (Fade and Chalk resistant).
- Available in widths up to 40'2" wide.
- For larger openings than 40'2" wide please see our Swing-Up Center Post System video.
- Midland's 3" Energy Saver will never lose its 17.05 R-Value!
- Midland's 3" Energy Saver will never take on moisture!
- Midland's 3" Energy Saver is so strong that Joe's truck can drive on it!
- See all of the photos below!
- Work Included
The doors will be Model 3" Energy Saver as manufactured by Midland Garage Door Mfg. Co.
- Other Work
Related structure work, opening preparation, field painting and electrical work etc. falls into the responsibility of other trades.
Sections will be roll-formed, hot dipped, galvanized 25 ga. pebble textured exterior and interior (optional 20 ga. exterior available). Sections will be pressure bonded to a closed cell polystyrene core and will have a thickness of 3". Sections will incorporate a PVC thermal break to prevent heat or cold conductivity.
Insulation will be rigid 3" closed cell extruded polystyrene free of CFCs and HCFCs and will be laminated to provide strength and prevent loss of thermal efficiency over time. The insulation will have a calculated R-Value of 17.05 and U-Value of .06 based on certified test data.
- Air Infiltration
All doors will be constructed with a PVC strip and bulb seal between sections to resist air infiltration
- Wind load
Doors will be designed to meet or exceed industry standards for wind loads (ANSI/ NAGDM 102-1988). Deflection of door in the horizontal position will not exceed 1/120 of the door width. Please consult factory for unusual requirements.
- End Stiles
End stiles will be 16 gauge steel and incorporate a thermal break to help prevent heat/cold conductivity between the inside and exterior steel
Hinges and fixtures will be galvanized steel. Full floating ball bearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations.
Track is 2" or 3" depending upon door size and requirements and angle mounted.
- Spring Counterbalance
Counter balance shall be oil tempered, helical wound torsion springs mounted on a ball bearing cross header shaft engineered for industrial application that comply with properties specified by ANSI/NAGDM 1021988. Galvanized aircraft type lifting cables with minimum safety factor of 8 to I and cast aluminum drums are standard.
Lock will be interior mounted slide lock. Optional commercial keyed lock is available.
PVC Weather-strip between sections meeting rubber tube seals fitted inside every joint. Bottom weather-strip will be U'd shape astragal fastened to the bottom of the door with an extruded aluminum holder for an effective seal at the sill.
Finish will be baked-on polyester over epoxy primer in White interior and White or Brown exterior, (20 GA exterior white only)
Operation will be by manual pull rope. Optional chain hoist and electric operator are available.
Doors should be installed in compliance with Midland Garage Door Mfg. Co. instructions by authorized Midland Garage Door installation professionals.
- Thermal Glazing
- High Cycle Springs
- Jamb Weather-strip
- Electric Operator
- Chain Hoist
- Bottom Sensing Edge
- Rubber Header Seal
- Full Vision Aluminum Sections
- Carwash Modification
»Color Design Options
Midland garage doors are available in several easily coordinated colors. Great looks and great quality, now that's real value! Enhance the look of your building with a Midland overhead door and our great color design options.
»Window Design Sizes
Midland Garage Door offers a variety of window design sizes for your new door. These windows are sure to fit any design preference. Our window design options are designed with the same attention to detail we put into all of our products.
Plain- 24x7- 24x12- 44x15 sizes